Official images and details of the 2013 Peugeot RCZ-R have been revealed. Peugeot RCZ-R concept is powered by 260-horsepower 1.6 liter THP turbo engine and probably remain unchanged in the production car.
Subscribe to:
Post Comments (Atom)
Last 7-day Most Viewed Pages
-
I asked Brembo how to identify if the discs are genuine. I was informed that Genuine Brembo Discs should... be either blanks, cross-drilled,...
-
All the while I had been thinking the battery was the culprit every time the starter motor didn't do its job. But the battery works fin...
-
If you have a Peugeot powered by EP6-DT* engine, sooner or later there is a chance for you to experience "Intermittent Power Loss"...
-
[updated on July 1st, 2010 on 400m standing test] When I planned to buy another car in 2008/2009 my basic specs were:- - costs less than RM1...
-
Got problem with your ELM327 interface but feel shy to ask? ... take a peep HERE - whatever mode of connection (USB, bluetooth, etc..). Nob...
-
There are about a dozen of steps to follow before the battery can be removed. Of course the bonnet must be opened first la... Tools neede...
-
I used to have a problem with my earlier Peugeot [not 308] AL4-Transmission. It was under warranty, so it didn't incur any direct cost t...
-
Step 1 HID conversion kit installation begins with the HARDEST step, i.e choosing and picking out the right HID kit - there is a large r...
-
Recommended "All-rounder" Performance Tyres [ 225/45 R17 for Peugeot 308 Turbo]. Arranged in alphabetical order: All are best f...
-
Everybody wants to save fuel, but there're lots and lots of incorrect advices I found on local and international motorcar forums on how ...
All-time Most Popular Posts
-
All the while I had been thinking the battery was the culprit every time the starter motor didn't do its job. But the battery works fin...
-
Not everybody knows exactly where the oil filter cartridge housing is located. It is actually hidden underneath air intake flexible hose. ...
-
There are about a dozen of steps to follow before the battery can be removed. Of course the bonnet must be opened first la... Tools neede...
-
I used to have a problem with my earlier Peugeot [not 308] AL4-Transmission. It was under warranty, so it didn't incur any direct cost t...
-
Everybody wants to save fuel, but there're lots and lots of incorrect advices I found on local and international motorcar forums on how ...
-
If you have a Peugeot powered by EP6-DT* engine, sooner or later there is a chance for you to experience "Intermittent Power Loss"...
-
Prerequisite: u must be able to know how to remove car wheel and have knowledge on how to remove/replace front brake pads. If not pls visi...
-
Light beams should be realigned every time after bulbs replacement to avoid causing a nuisance to other road users . The only tools require...
-
Step 1 HID conversion kit installation begins with the HARDEST step, i.e choosing and picking out the right HID kit - there is a large r...
-
I've been observing "Super Knocking" is a common problem associated with EP6-DT* engines. At the beginning it is not easy t...
No comments:
Post a Comment