uncleDIY LED conversion bulb

1. Get the tools and materials required...
... wire cutter, long-nose plier, soldering iron, soldering lead, super bright white LEDs, 1157 base, etc

2. Solder four_LEDs in series for DRL circuit like this...
[observe where are the cathodes and the anodes], and for the sidelight solder four LEDs like this...
All together u need six sets for the DRL and one set for side light for each 1157 conversion bulb.

3. Solder each LED cathode to the 1157 base

4. Solder all the anodes together and reinforce the cathodes

5. Test....

6. Connect the anode to the base terminal using an insulated wire.

7. Solder the LED set for the side-light around the lower part of the DRL LED cluster to finish the 'assembly'.

8. Install the DIY LED conversion bulb and test run....


Related Topic on LEDs


Frequently Visited Pages:
| Home | Fuel Consumption | Performance | uncle's DIY |
Car Size Comparison | Motoring Myths | RON95 |