... wire cutter, long-nose plier, soldering iron, soldering lead, super bright white LEDs, 1157 base, etc2. Solder four_LEDs in series for DRL circuit like this...
[observe where are the cathodes and the anodes], and for the sidelight solder four LEDs like this...
All together u need six sets for the DRL and one set for side light for each 1157 conversion bulb.
3. Solder each LED cathode to the 1157 base
4. Solder all the anodes together and reinforce the cathodes
5. Test....
6. Connect the anode to the base terminal using an insulated wire.
7. Solder the LED set for the side-light around the lower part of the DRL LED cluster to finish the 'assembly'.
8. Install the DIY LED conversion bulb and test run....
Related Topic on LEDs
Frequently Visited Pages:
| Home | Fuel Consumption | Performance | uncle's DIY |
Car Size Comparison | Motoring Myths | RON95 |
7 comments:
kudos to our uncle Ahwan,man with a golden touch...
is this brighter than your previous creation?
canggih..
azhelmy, aslan308: Soldering used to be part of my jobs. He heee....
Verm: They're better than previous versions...
great. thx.
how's the power consumption?
Bila nak buka kedai ni? ramai tunggu nak buat tu....:)
nice work . I like it
You are most welcome :)
Post a Comment